Arduino WiFi Shield CC3000

2,800.00
  1. Based on TI CC3000 WIFI module.
  2. Use SPI communication .
  3. Integrated 3.3V regulator .
  4. Level shifter integrated .
  5. Integrated ceramic antenna .
  6. It has a connector for external antenna WIFI
  7. Compatible with Arduino UNO, Mega, Leondardo & Micro
  8. Antenna: Onboard Ceramic
  9. MicroSD card slot onboard
  10. Reset button
  11. Communication Protocol: SPI
  12. Connects via IEEE 802.11 b/g networks
  13. Tx Bandwidth: 11Mbps
  14. Tx Sensitivity: +/-18dBm
  15. Rx sensitivity: -86dBm
  16. IRQ pin for interrupts (useful for asynchronous connections)
  17. Supports WEP, WPA, WPA2, TKIP and AES
  18. TCP and UDP Client & Server Modes available
  19. Max Concurrent TCP/UDP Sockets: 4
  20. TCP/IP stack is built in.
Out of stock

Out of stock

Features

  1. Arduino, Crowduino, Seeeduino, Arduino Mega and Crowduino Mega compatible
  2. Support SD card 2GB and 4GB
  3. Wireless network processor
    • IEEE 802.11 b/g ( 2.4GHz)
    • Embedded IPv4 TCP/IP stack
  4. Best-in-class radio performance
    • TX power: +18.0 dBm at 11 Mbps, CCK
    • RX sensitivity: –88 dBm, 8% PER, 11 Mbps
  5. Works with low MIPS and low-cost MCUs with compact memory footprint
    • Small code size (Flash and RAM) required for MCU
  6. FCC, IC, CE and TELEC certified reference design with a chip antenna
  7. Integrated crystal and power management
  8. Small form factor
    • 16.3 mm × 13.5 mm × 2 mm
  9. Operating temperature: –20°C to 70°C
  10. SmartConfig technology enables simple Wi-Fi configuration using a smartphone, tablet or PC
  11. Proven Wi-Fi interoperability; based on TI’s seventh generation of proven Wi-Fi solutions
  12. Complete platform solution including user and porting guides, API guide, sample applications, and support community

Specifications

CC3000 Specifications
CC3000’s Characteristics
Standards 802.11 b/g, BSS Station
Wi-Fi Security Modes WEP, WPA/WPA2 (AES and TKIP – Personal)
Embedded Wi-Fi TCP/IP stack (IPv4 – DHCP client, DNS, mDNS, ARP),
Wi-Fi driver, security supplicant, Auto-calibrated radio
Required Code size As low as 5KB Flash & 360B RAM
Host Interface SPI at 16MHz
Power Modes Active Mode (92mA typ RX current),
Shutdown Mode (<5uA)
Power Supply 2.9V – 4.8V
I/O Voltage 1.8V – 3.6V
Connections 4 Sockets (UDP or TCP)
Throughput (TCP) ~4 Mbps*Note This was measured for CC3000, when combined with MSP430FR5739
Headless Configuration SmartConfig™ Technology

Reviews

There are no reviews yet.

Be the first to review “Arduino WiFi Shield CC3000”

Your email address will not be published. Required fields are marked *

Out of stock