Motors

  • You've just added this product to the cart:

    12V DC Motor 350RPM w/Encoder (12kg*cm)

    12V DC Motor 350RPM w/Encoder (12kg*cm)
    0 out of 5

    12V DC Motor 350RPM w/Encoder (12kg*cm)

    This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.

    3,000.00
  • You've just added this product to the cart:

    Analog Servo HD 1501mg

    -31%
    0 out of 5

    Analog Servo HD 1501mg

    It is a metal geared analog servo which can deliver extra high torque as compared many high power servo motors

    5,800.00 4,000.00
  • You've just added this product to the cart:

    BLDC 1400KVA

    -17%
    0 out of 5

    BLDC 1400KVA

    It is an extremely powerful brushless motor in small size. It is specifically made for quadcopters so that it becomes easy for them to fly due large RPM of the motor.

    900.00 750.00
  • You've just added this product to the cart:

    DF Metal Geared 15Kg Standard Servo 180° (DSS-M15)

    DF Metal Geared 15Kg Standard Servo 180° (DSS-M15)
    0 out of 5

    DF Metal Geared 15Kg Standard Servo 180° (DSS-M15)

    INTRODUCTION

    DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability.

    Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°servo will never let you down when you need it. Tested with high load capacity for 12 hours long, this DSS-M15 servo demonstrates a maximum torque of 18Kg without much vibration or heat.

    1,800.00
  • You've just added this product to the cart:

    Metal DC Geared Motor w/Encoder - 12V 122RPM 38Kg.cm

    Metal DC Geared Motor w/Encoder - 12V 122RPM 38Kg.cm
    0 out of 5

    Metal DC Geared Motor w/Encoder – 12V 122RPM 38Kg.cm

    This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-90EN. It is a powerful 12V motor with a 90:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 1440 counts per revolution of the gearbox’s output shaft.

    These units have a 0.61″ long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
    The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart.
    This motor is an ideal option for your mobile robot project.

    Note: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.

    3,000.00
  • You've just added this product to the cart:

    Metal DC Geared Motor w/Encoder - 12V 251RPM 18Kg.cm

    Metal DC Geared Motor w/Encoder - 12V 251RPM 18Kg.cm
    0 out of 5

    Metal DC Geared Motor w/Encoder – 12V 251RPM 18Kg.cm

    This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox’s output shaft.
    These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
    The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.
    This motor is an ideal option for your mobile robot project.
    Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.
    3,000.00
  • You've just added this product to the cart:

    MG 995 Servo Motor

    -13%
    0 out of 5

    MG 995 Servo Motor

    MG995 has metal gears and high torque and is a commonly used servo motor of mechanical application for example robotic arms etc. It comes with a 3 pin power control cable for connections with control devices.

    600.00 520.00
  • You've just added this product to the cart:

    Tower Pro MG996R - 360Deg (11 Kg.cm)

    Tower Pro MG996R - 360Deg (11 Kg.cm)
    0 out of 5

    Tower Pro MG996R – 360Deg (11 Kg.cm)

    This is an upgraded version of the famous Towerpro MG996R servo. It has now been redesigned with a  PCB and IC controll system which makes it perfect for robotic use as it has the capability of rotating clockwise and anti-clockwise continously if you wish to do so. Its internal gearing and motor are also upgraded to improve dead bandwith and centering.

    800.00
  • You've just added this product to the cart:

    Tower Pro Servo MG995 (13 Kg.cm) (Copy)

    Tower Pro Servo MG995 (13 Kg.cm) (Copy)
    0 out of 5

    Tower Pro Servo MG995 (13 Kg.cm) (Copy)

    Product Model MG995/945/996 products size 40.7 * 19.7 * 42.9mm Weight 55g Work to torque 13KG/cm reaction speed 53-62R / M use temperature -30 ~ +60 ° Dead-set 4 microseconds plug type JR FUTABA general rotation angle up to 180 degrees Servo type analog servos operating current of 100mA voltage of 3-7.2V Structural material metal copper teeth, coreless motor, double ball bearing no load Operating speed of 0.20 seconds / 60 degrees (4.8V); 0.16 seconds / 60 degrees (6.0V) The attachment contains helm, the line length 30CM, fixing screws, damping pouches and aluminum sets and other accessories (see really making plans) Scope Biped robot, robot, suitable for 50 -90 grade methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft models.

    750.00