-
3.5″ IPS TFT LCD for Arduino MEGA2560
IPS 3.0 inch 36P HD TFT LCD Color Screen Module
- Size: IPS 3.2 inch TFT
- Module Size: 89.92(W)*54.25(L) (mm)
- Active View: 67.68(W)*42.12(L) (mm)
- Resolution: 480*320 (Pixel)
- Drive IC: HX8357C
- PIN No.: 36Pin (Compatible for Mega2560)
- Backlight: 6 LED
- Touch: No
- Module Power: 5V / 3.3V
- Data Bus: 16bit parallel interface
- Power: 80-110 (mA)
Add to cartQuick View -
Arduino Sensor Shield
The Arduino sensor shield board allows the user to connect range of sensors to your arduino with the help of simple connections through jumper wires.
₨275.00₨220.00Add to cartQuick View -
Out of stockRead moreQuick View
Arduino WiFi Shield CC3000
The CC3000 WiFi module from Texas Instruments is a small silver package which finally brings easy-to-use, affordable WiFi functionality to your Arduino projects.
It uses SPI for communication so you can push data as fast as you want or as slow as you want. It has a proper interrupt system with IRQ pin so you can have asynchronous connections. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP & AES. A built in TCP/IP stack with a “BSD socket” interface supports TCP and UDP in both client and server mode, with up to 4 concurrent socket connections.
Read moreQuick View -
CNC Shield
It is an open source firmware that can run on Arduino UNO the turns G-code commands to stepper signals. It consists of PWM Spindle and direction pins, as well as 4 axis support and 2x End stops for each axis.
₨350.00₨220.00Add to cartQuick View -
CNC Shield V3
It is a shield for aeduino that fits over the arduino uno/mega board and can be used to drive a CNC(Computer Numerical Control) machine or a 3d printer.
Add to cartQuick View -
GPS Arduino Shield
This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.
Add to cartQuick View -
L293D Motor Shield
This motor driver expansion board is based on the L293D chip which is designed to drive up to 4 bidirectional DC motors with individual 8-bit speed selection. It can also drive 2 stepper motors (unipolar or bipolar), single coil or double coil, interleaved or micro-stepping. It contains 4 H-bridges which provide up to 0.6 A per bridge (1.2A peak) at voltages from 4.5 V to 36 V. This shield has pull down resistors to keep the motors disabled during power up. It also features a 2-pin terminal block to ensure separate logic and motor external power supplies. This expansion board is compatible with Arduinos Mega, Diecimila, and Duemilanove. This motor driver shield is capable of driving:Four DC motors and two servos, Two DC motors, stepper motor, and two-way servo, Two stepper motors and servos.
₨350.00₨310.00Add to cartQuick View -
Ramps 1.4 Shield
Ramps is short for reprap Arduino mega pololu shield, it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board). Ramps can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3Dprinter. The combination of Ramps1.4+MEGA2560+A4988/DRV8825 is becoming a mainstream of DIY 3D printer control board.
₨820.00₨800.00Add to cartQuick View -
W5100 Ethernet Shield
The Arduino Ethernet Shield uses the Wiznet W5100 and includes an microSD card slot. The shield uses the six pin ICSP header for the SPI signals, making it compatible with both the regular Arduino form factor (Duemilanove, Uno) and also the Mega 1280 and Mega 2560 Arduinos
Add to cartQuick View -
WeMos D1 — UNO like wifi board ESP-8266 based
WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible
Description:
This is the old version of WeMos D1.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
A Micro USB connection
A power jack, 9-24V power input.
Compatible with Arduino
Compatible with nodemcuInfos: click here!!
Package included:
1 x WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible
₨800.00₨650.00Add to cartQuick View -
Xbee Shield
It is an Arduino shield which allows aduino to communicate wirelessly with the devices.
₨860.00₨550.00Add to cartQuick View -
Zigbee Shield
The Zigbee shield allows an Arduino board to communicate wirelessly. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.
₨600.00₨570.00Add to cartQuick View
- HOME
- Shop
- More categories
- Arduino
- Communication Modules
- Bio-Medical
- FPGA
- Development Boards
- Keypads/Touchpad/Buttons
- LCD/Touch LCD
- Multicopter Accesories
- Robotics
- Wheels
- Motors
- Sensors
- TechTree
- Wires & Connectors
- Learn
- Contact Us