Arduino

  • You've just added this product to the cart:

    16 Channel Relay Module

    0 out of 5

    16 Channel Relay Module

    The 16 channel relay module is an interface board which has the ability to control various appliances and equipments due to its relays module. Every input of the board is isolated through a photocoupler. This is easy to use and can be controlled through any microcontroller board like Arduino, 8051, PIC etc. These relays are active on low level signal on each control pin and 16 LEDs indicates the status of these 16 relays.

  • You've just added this product to the cart:

    2.4" TFT LCD Shield For Arduino UNO R3 (ILI9340)

    2.4" TFT LCD Shield For Arduino UNO R3 (ILI9340)
    0 out of 5

    2.4″ TFT LCD Shield For Arduino UNO R3 (ILI9340)

    Product Description

    • Only need 4-6 IOs (D13~D8(SCK, DO, DI, CS), AO(DC), RST) to control
    • 240*320 Resolution for 2.2”, and 128*160 for 1.8”
    • QVGA display, very great display quality
    • Includes SD Slot for all versions
    • Touch screen function: Available for 2.4” and 2.8”, TP control IC XPT2046.
    • Get many arduino library support, we tested UTFT library, adafruit library and arduino official TFT library, see the “displaytext” demo that using TFT library here (works for 1.8”).
    • Stable product supplier and constant good quality, good for large batch using, compare to Nokia 5110 LCD (savaged second-hand), it is double price but better quality and stable supplying.
    950.00
  • You've just added this product to the cart:

    3.0/3.2" 480x320 IPS TFT LCD for Arduino MEGA2560 (HX8357B)

    3.0/3.2" 480x320 IPS TFT LCD for Arduino MEGA2560 (HX8357B)
    0 out of 5

    3.0/3.2″ 480×320 IPS TFT LCD for Arduino MEGA2560 (HX8357B)

    IPS 3.0 inch 36P HD TFT LCD Color Screen Module 

    • Size: IPS 3.2 inch TFT
    • Module Size: 89.92(W)*54.25(L) (mm)
    • Active View: 67.68(W)*42.12(L) (mm)
    • Resolution: 480*320 (Pixel)
    • Drive IC: HX8357C
    • PIN No.: 36Pin (Compatible for Mega2560)
    • Backlight: 6 LED
    • Touch: No
    • Module Power: 5V / 3.3V
    • Data Bus: 16bit parallel interface
    • Power: 80-110 (mA)
    1,350.00
  • You've just added this product to the cart:

    8 Channel Ethernet Relay Controller (Support PoE & USB)

    8 Channel Ethernet Relay Controller (Support PoE & USB)
    0 out of 5

    8 Channel Ethernet Relay Controller (Support PoE & USB)

    With Ethernet relay, IoT has become so easy. RLY-8-POE-USB is a POE & USB controlled 8 channel relay controller based on STM32. With this module users are able to do remote control/ switching power supply centralized management, the purpose of this product can be directly by net POE power supply switch power supply is connected to the Internet, so you just need to a cable link equipment, suitable for: home decoration, hotel, shopping mall management, Internet cafes, karaoke time, daily office, stores monitoring, networking, industrial control equipment, test equipment, power control, unattended, underground pipes, mining equipment, ships, machine room, street lamp management, intelligent management and centralized management.

    Please read the PoE compatiblity issue before you buy:
    We have passed the test on PoE Switches, list as

    • ONV POE31004P
    • Tenda TEF1008P
    6,200.00
  • You've just added this product to the cart:

    Arduino LilyPad

    Arduino LilyPad
    -21%
    0 out of 5

    Arduino LilyPad

    This is LilyPad Arduino – the main board consisting of an ATmega168V with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! It has a surface mount programming connector to keep the header from poking through.

    The LilyPad is compatible with an FTDI cable and the Arduino LilyPad/Pro/ProMini Programmer. This allows the LilyPad to work with the auto-reset feature used in the Arduino software. The LilyPad is no longer compatible with the LilyPad USB Link.

    LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

     

    950.00 750.00
  • You've just added this product to the cart:

    Arduino MEGA 2560

    Arduino MEGA 2560
    0 out of 5

    Arduino MEGA 2560

    The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    800.00
  • You've just added this product to the cart:

    Arduino Mega with Logo 2560

    -11%
    0 out of 5

    Arduino Mega with Logo 2560

    The Arduino Mega 2560 is a microcontroller based on the Atmega 2560. It is also used as the master controller for master slave networks. It has 54 digital I/O pins out of which 15 are PWM pins. It has 16 analog inputs and 4 UARTS hardware serial ports, a USB connection, a power jack, an ICSP header and a reset button.

    1,400.00 1,250.00
  • You've just added this product to the cart:

    Arduino Nano V3

    Arduino Nano V3
    0 out of 5

    Arduino Nano V3

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

    400.00
  • You've just added this product to the cart:

    Arduino ProMini 5V/16MHZ

    Arduino ProMini 5V/16MHZ
    0 out of 5

    Arduino ProMini 5V/16MHZ

    The Arduino Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

    The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

    400.00
  • You've just added this product to the cart:

    Arduino Sensor Shield

    -20%
    0 out of 5

    Arduino Sensor Shield

    The Arduino sensor shield board allows the user to connect range of sensors to your arduino with the help of simple connections through jumper wires.

    275.00 220.00
  • You've just added this product to the cart:

    Arduino Starter Kit (RFID Based) SKU-167

    Arduino Starter Kit (RFID Based) SKU-167
    0 out of 5

    Arduino Starter Kit (RFID Based) SKU-167

    Advanced Version Starter Kit the RFID learn Suite Kit LCD 1602 for Arduino UNO R3

    4,200.00
  • You've just added this product to the cart:

    Arduino UNO R3

    Arduino UNO R3
    0 out of 5

    Arduino UNO R3

    The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

    500.00